Ultimate slim?Aspect ratio 35:10!Tr...
02
09
Ultimate slim?Aspect ratio 35:10!Try a 14 -inch slender display that can be installed in both vertical and horizontal directions
Itoprotech's 14-inch mobile display "LCD14HCR-IPSW".The body size is about 358 (width) x 125 (depth) x 20 (thickness) mm
The LCD14HCR-IPsw, a 14-inch mobile display of Itoprotec, features an aspect ratio of 35:10 and is characterized by two general 16: 9 ratio mobile displays side by side. The company calls it a "bar -type monitor." [Photo] Recently, the elongated sub -display that is suitable for displaying SNS and the like has attracted attention among the enthusiasts. The topic started was the so -called "Tsui Wandering LCD", which was launched in the late 2020 of the Akihabara Radio Department Store, "Sigezone", and later released a product with similar concepts. It is These products that can secure a labeling space for SNS without eroding the usual work area by arranging the primary display, but most of them are likely to have been diverted a liquid crystal panel for car room mirrors. The size was around 8 type, and the total length was 20cm or not. The LCD14HCR-IPSW introduced here has a total length of about 36, as can be seen from the size of the 14 type..5cm, in width, is almost the same as a numeric keles keyboard.Of course, it can be set up standing up, but it is also suitable for placing various widgets in the gap between the keyboard and the display.This time, I borrowed a real machine from the manufacturer, so let's introduce the usability.
16: Even more horizontal than two screens side by side
First, let's roughly hold down the basic specifications. The screen size is 14 type, the resolution is 3840x1100 pixels, and the aspect ratio is 35:10, so it is almost 4: 1, and in the current display, it is generally a ratio of connecting two 16: 9 liquid crystals. correct. The viewing angle is 160 degrees up and down / left and right, and an IPS -type liquid crystal. The screen is said to be glossy, but the outside light is almost completely reflected. The brightness is 255 Nito, the contrast ratio is 900: 1, the refresh rate is 60Hz, and the response speed has not been published. It is not compatible with touch operation. The audio output system is substantial, with two speakers (2W x 2) built in, and earphone jacks are also available. The stand comes with two types: foldable quick stand and desktop stand. The former is for temporary installation such as mobile use, and the gap with the desk can be installed almost zero, and it is also an advantage that it can be folded. However, it is not very sturdy due to the mechanism that is fixed with double -sided tape, and the hinge is loose and the angle is likely to change, so it is not very stable. It cannot be used for vertical placement, as the product page says "support for flatly installed". This is because the total length of this product is less than 40cm, and if it is placed vertically, it cannot withstand the load. Another desktop stand is a full -fledged stationary type that uses a shoe. It seems that the designed one for the camera is diverted, the stability is perfect, and the angle change is also highly flexible. In addition, vertical horizontal placement can be changed smoothly. On the other hand, the neck is wider than the display itself, and it is a bit bulky, such as being unable to reach the side of the notebook PC. There is also a problem that the height cannot be adjusted. I will look closely later, including the VESA mount, which is the other way of installation. Next, let's look at the connection with the notebook PC.
次ページは：さまざまな映像入力に対応し付属品も充実最終更新:ITmedia PC USER
