The 3rd Why is VAIO Z "USB 3.0"?: V...
12
08
The 3rd Why is VAIO Z "USB 3.0"?: VAIO Z Road test (page 1/3)
"USB 3.It would have been better if it was "0 compatible"
ソニーの「VAIO Z」Sony's "VAIO Z (VPCZ1)" (hereafter, VAIO Z) is one of the "Strongest Classes" on mobile notebook PCs as of June 2010.The 2010 summer model was also announced, but there was no significant change in the specifications, so the spring model users are relieved (somehow) (but the wireless WAN and mobile WiMAX can now be installed at the same time."Remote keyboard with PlayStation3" is attached as standard.
However, it is not "all in".Many of the users who want VAIO Z are probably worried, or many people will already have already implemented on the desktop PC..There is no new generation external storage interface that supports high -speed data transfer such as 0 "or" ESATA ".
Then one of these "USB 3.Let's add "" ".Anyway, if you purchase the VAIO Z body along with the CPU, memory capacity, full HD liquid crystal display, SSD, etc., you will feel a lot of money, so it will be quite paralyzed as "anyway", so it will be expanded (USB 3..0) I would recommend that you do it within one month if you can use the main unit.
By the way, VAIO Z is equipped with one ExpressCard/34 slot, so ExpressCard/34 compatible USB 3.0 You can introduce an interface expansion card.This time there are some existing ExpressCard/34 USB 3.0 Verify which of the interface expansion card matches VAIO Z.
The following four products have been prepared.
Tsurichi USB3.0 and GM3000EX are USB3-EXC and PCMICA-E-USB3, a model with a "non-protruding" specification from the ExpressCard slot..0 is a little out of the slot, but two USB 3.0ポートを増設できるモデルだ。本体に差しっぱなしにして“半内蔵化状態”で運用するならTsurichi USB3.0 and GM3000EX.On the other hand, USB3-EXC and UNITEK PCMICA-E-USB3.0 is a USB 3 at home or at home, not the PC itself, because the terminals protrude considerably from the main unit..0 Compatible It will be used by leaving it into an external HDD.
左から、エアリア「Tsurichi USB3.0」、フォトファースト「GM3000EX」、上海問屋「UNITEK PCMICA-E-USB3.0」、アイ・オー・データ機器「USB3-EXC」ちなみに、Tsurichi USB3.Except for 0, auxiliary power is also available.GM3000EX is another USB 2.0 UNITEK PCMICA-E-USB3 is included with a bifurcated USB cable with a specification that connects to a port and obtains an auxiliary power supply..0 and USB3-EXC have a DC input terminal to connect the AC adapter.
補助電源については、電源を内蔵する仕様の据え置き型外付けHDDで使うなら必要ないが、バスパワー駆動のデバイスで使う場合は電力不足で認識しない機器もあったので、少し注意したい（今回は、Tsurichi USB3.USB 2 other than 0.0接続の比較用ポータブルHDDが動作しなかった。逆に、Tsurichi USB3.0 was used for bus power operation).
According to the I-O data device, USB3-EXC requires an optional AC adapter "USB-ACADP3" if you use it over 300mA for a total of 2 ports.Using SB-ACADP3, you can supply up to 900mA for each port.
製品別に速度差はある？1|2|3次のページへ
